1. Home
  2. Products
  3. Stone / Tile / Concrete- Restoration
  4. Cleaners and Sealers
  5. Prosoco
  6. 600 Detergent

600 Detergent

Your Price: $0

600 Detergent new masonry cleaner

Sure Klean® 600 Detergent is a general purpose, concentrated acidic cleaner for brick, tile and concrete surfaces. Dissolves mortar smears and construction dirt quickly, leaving the masonry clean and uniform with no acid burning or streaking.

Advantages
  • The No. 1 selling proprietary cleaner for new masonry.
  • Proven effective through years of use.
  • Recommended by many brick, tile and mortar manufacturers.
  • Safer than muriatic acid for new masonry surfaces.
  • Fast and easy to apply — use with cold water rinse.
  • Special wetting agents allow larger masonry surfaces to be cleaned at one time eliminating streaking.
Limitations
  • May not be suitable for cleaning buff-colored brick and brick or tile with manganese or other metallic additives. See product literature on Sure Klean® Vana Trol®.
  • Not suitable for cleaning polished or certain glazed surfaces. Always test to ensure suitability.
  • Repeated applications may leave a detergent residue. To reduce potential for detergent residue; always prewet; rinse thoroughly; do not exceed two applications.
  • Not effective for removing atmospheric dirt and black carbon stains. Use the appropriate Sure Klean® Restoration Cleaner to remove atmospheric staining from older masonry surfaces.
Product Data Sheet

PRODUCT DATASHEET
Sure Klean® 600 Detergent is a general purpose, concentrated acidic cleaner for brick, tile and concrete surfaces. 600 Detergent dissolves mortar smears and construction dirt quickly, leaving the masonry clean and uniform with no acid burning or streaking.

Advantages
•The No. 1-selling proprietary cleaner for new masonry.
•Proven effective through years of use.
•Recommended by many brick, tile and mortar manufacturers.
•Safer than muriatic acid for new masonry surfaces.
•Fast and easy to apply – use with cold water rinse.
•Special wetting agents let larger masonry surfaces be cleaned at one time, eliminating streaking.

Limitations
•May not be suitable for cleaning buff-colored brick and brick, stone or tile with manganese or other metallic additives. See product literature on Sure Klean® Vana Trol®.
•Not suitable for cleaning polished or certain glazed surfaces. Always test to ensure suitability.
•Repeated applications may leave a detergent residue. Always prewet to reduce potential for detergent residue. Rinse thoroughly. Don’t apply more than twice.
•Not effective for removing atmospheric dirt and black carbon stains. Use the appropriate Sure Klean® restoration cleaner to remove atmospheric staining from older masonry surfaces.

TYPICAL TECHNICAL DATA
FORM: Clear liquid with slight amber color
SPECIFIC GRAVITY: 1.130
pH: 0.1 @ 1:9 dilution
WT/GAL: 9.4 lbs.
ACTIVE CONTENT: NA
TOTAL SOLIDS: NA
FLASH POINT: NA
FREEZE POINT: < -22°F (< -30°C)
SHELF LIFE: 3 years in tightly sealed, unopened container

PREPARATION
Protect people, vehicles, property, metal, painted surfaces, plants and other nonmasonry materials from product, splash, residue, wind drift and fumes. When working over traffic, clean when traffic is at a minimum. Protect or divert traffic if necessary.

Vapors and liquid can damage a variety of metals and fabrics. Clean masonry before installing windows, doors, finished flooring, metal fixtures, hardware, light fixtures, roofing materials and other nonmasonry items that the cleaner could harm. If already installed, protect with polyethylene before application. Sure Klean® Strippable Masking is appropriate for use with this product to protect windows. All caulking and sealant materials should be in place and thoroughly cured before cleaning.

New brick and tile surfaces clean most effectively 14 - 28 days after masonry installation. Mortar and grout smears left on the surface longer result in a more difficult clean down and may cause undesirable results. Cleaning high-strength mortar/grout within seven days improves results. Presence of excessive moisture in the wall contributes to efflorescence and other staining. Always protect open wall cavities from rain during construction.

Surface and Air Temperatures
For best results, clean when air and masonry surface temperatures are 40°F (4°C) or above. To avoid harming masonry, don’t clean when temperatures are below freezing or will be overnight. If freezing conditions existed before application, let the masonry thaw.

600 Detergent is recommended for these substrates. Always test. Coverage is in sq.ft./m. per gallon of concentrate.


Substrate

Type

Use?

Coverage

Architectural

Concrete Block*

Burnished

Smooth

Split-faced

Ribbed

no

yes

yes

yes

300-400 sq.ft. 28-37 sq.m.

Concrete*

Brick

Tile

Precast Panels

Pavers

Cast-in-place

yes

yes

yes

yes

yes

600-1100 sq.ft. 56-102 sq.m.

Fired Clay

Brick

Tile

Terra Cotta

Pavers

yes

yes

yes

yes

500-900 sq.ft. 46-84 sq.m.

Marble,Travertine,Limestone

Polished

Unpolished

no

no

NA

NA

Granite

Polished

Unpolished

no

yes

NA

600-1200 sq.ft. 56-111 sq.m.




Slate

Unpolished

yes   

600-1200 sq.ft. 56-111 sq.m.

Sandstone

Unpolished

yes

600-900 sq.ft. 56-102 sq.m.

*Repeated applications may damage surfaces. Sure Klean® Custom Masonry Cleaner is a more appropriate product. Always test to ensure desired results. Coverage estimates depend on surface texture and porosity.


Related Items

Recently Viewed Items